RouterOS выпустили новую версию.
Для обновления нажмите «Проверить наличие обновлений» в «System / Package» в  интерфейсе конфигурации RouterOS или перейдите на нашу страницу загрузки: http://www.mikrotik.com/download

Что нового в 6.40.1 (2017-авг-03 12:37):


*) bonding — improved reliability on bonding interface removal;
*) chr — fixed false warnings on upgrade reboots;
*) dhcpv6-client — do not run DHCPv6 client when IPv6 package is disabled;
*) export — fixed export for different parameters where numerical range or constant string is expected;
*) firewall — properly remove «address-list» entry after timeout ends;
*) interface — improved interface state change handling when multiple interfaces are affected at the same time;
*) lte — fixed LTE not passing any traffic while in running state;
*) ovpn-client — fixed incorrect netmask usage for pushed routes (introduced in 6.40);
*) pppoe-client — fixed incorrectly formed PADT packet;
*) rb2011 — fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) rb922 — restored missing wireless interface on some boards;
*) torch — fixed Torch on PPP tunnels (introduced in 6.40);
*) trafficgen — fixed «lost-ratio» showing incorrect statistics after multiple sequences;
*) winbox — added «none-dynamic» and «none-static» options for «address-list-timeout» parameter under NAT, Mangle and RAW rules;
Что нового в v6.40 (2017-Jul-21 08:45):


!) lte — added initial fastpath support (except SXT LTE and Sierra modems);
!) lte — added initial support for passthrough mode for lte modems that supports fastpath;
!) wireless — added Nv2 AP synchronization feature «nv2-modes» and «nv2-sync-secret» option;
*) bonding — fixed 802.3ad mode on RB1100AHx4;
*) btest — fixed crash when packet size has been changed during test;
*) capsman — added «current-registered-clients» and «current-authorized-clients» count for CAP interfaces;
*) capsman — fixed EAP identity reporting in «registration-table»;
*) capsman — set minimal «caps-man-names» and «caps-man-certificate-common-names» length to 1 char;
*) certificate — added «crl-use» setting to disable CRL use (CLI only);
*) certificate — update and reload old certificate with new one if SKID matches;
*) chr — fixed MAC address assignment when hot plugging NIC on XenServer;
*) chr — maximal system disk size now limited to 16GB;
*) conntrack — fixed IPv6 connection tracking enable/disable;
*) console — fixed different command auto complete on ;
*) crs212 — fixed Optech sfp-10G-tx module compatibility with SFP ports;
*) defconf — added IPv6 default firewall configuration (IPv6 package must be enabled on reset);
*) defconf — improved IPv4 default firewall configuration;
*) defconf — renamed 192.168.88.1 address static DNS entry from «router» to «router.lan»;
*) dhcp — added «debug» logs on MAC address change;
*) dhcpv4-client — added «gateway-address» script parameter;
*) dhcpv4-server — fixed lease renew for DHCP clients that sends renewal with «ciaddr = 0.0.0.0»;
*) dhcpv4-server — fixed server state on interface change in Winbox and Webfig;
*) discovery — fixed timeouts for LLDP neighbours;
*) dns — remove all dynamic cache RRs of same type when adding static entry;
*) dude — fixed server crash;
*) email — added support for multiple attachments;
*) ethernet — fixed occasional broken interface order after reset/first boot;
*) ethernet — fixed rare linking problem with forced 10Mbps full-duplex mode;
*) export — added «terse» option;
*) export — added default «init-delay» setting for «/routerboard settings» menu;
*) export — added router model and serial number to configuration export;
*) export — fixed «/interface list» verbose export;
*) export — fixed «/ipv6 route» compact export;
*) export — fixed MPLS «dynamic-label-range» export;
*) export — fixed SNMP «src-address» for compact export;
*) fastpath — improved performance when packets for slowpath are received;
*) fastpath — improved process of removing dynamic interfaces;
*) fasttrack — fixed fasttrack over interfaces with dynamic MAC address;
*) fetch — added «src-address» parameter for HTTP and HTTPS;
*) filesystem — improved error correcting process on tilera and RB1100AHx4 storage;
*) firewall — added «none-dynamic» and «none-static» options for «address-list-timeout» parameter;
*) firewall — fixed bridge «action=log» rules;
*) firewall — fixed cosmetic «inactive» flag when item was disabled;
*) firewall — fixed crash on fasttrack dummy rule manual change attempt;
*) firewall — removed unique address list name limit;
*) hAP ac lite — removed nonexistent «wlan-led»;
*) hotspot — added «address-list» support in «walled-garden» IP section;
*) hotspot — require «dns-name» to contain «.» symbol under Hotspot Server Profile configuration;
*) ike1 — added log error message if netmask was not provided by «mode-config» server;
*) ike1 — added support for «framed-pool» RADIUS attribute;
*) ike1 — create tunnel policy when no split net provided;
*) ike1 — fixed minor memory leak on peer configuration change;
*) ike1 — kill phase1 instead of rekey if «mode-config» is used;
*) ike1 — removed SAs on DPD;
*) ike1 — send phase1 delete;
*) ike1 — wait for cfg set reply before ph2 creation with xAuth;
*) ike2 — added RADIUS attributes «Framed-Pool», «Framed-Ip-Address», «Framed-Ip-Netmask»;
*) ike2 — added pfkey kernel return checks;
*) ike2 — added support for «Mikrotik_Address_List» RADIUS attribute;
*) ike2 — added support for «mode-config» static address;
*) ike2 — by default use «/24» netmask for peer IP address in split net;
*) ike2 — fixed duplicate policy checking with «0.0.0.0/0» policies;
*) ike2 — prefer traffic selector with «mode-config» address;
*) ipsec — added «firewall=add-notrack» peer option (CLI only);
*) ipsec — added information in console XML for «mode-config» menu;
*) ipsec — added support for «key-id» peer identification type;
*) ipsec — allow to specify chain in «firewall» peer option;
*) ipsec — do not deduct «dst-address» from «sa-dst-address» for «/0» policies;
*) ipsec — enabled modp2048 DH group by default;
*) ipsec — fixed connections cleanup on policy or proposal modification;
*) ipsec — optimized logging under IPSec topic;
*) ipsec — removed policy priority;
*) l2tp — fixed handling of pre-authenticated L2TP sessions with CHAP authentication;
*) l2tp-server — added «one-session-per-host» option;
*) log — added «poe-out» topic;
*) log — improved «l2tp» logs;
*) log — optimized «wireless,info» topic logs;
*) log — work on false CPU/RAM overclocked alarms;
*) lte — added «accounting» logs for LTE connections;
*) lte — added additional driver support for DWR-910;
*) lte — added info command support for the Jaton LTE modem;
*) lte — added initial support for «NTT DoCoMo» modem;
*) lte — added support for Huawei E3531-6;
*) lte — added support for ZTE TE W120;
*) lte — fixed info command when it is executed at the same time as modem restarts/disconnects;
*) lte — improved SMS delivery report;
*) lte — improved reliability on SXT LTE;
*) metarouter — fixed display of bogus error message on startup;
*) mmips — added support for NVME disks;
*) ovpn — added support for «push-continuation»;
*) ovpn — added support for topology subnet for IP mode;
*) ovpn — fixed duplicate default gateway presence when receiving extra routes;
*) ovpn — improved performance when receiving too many options;
*) packages — increased automatic download retry interval to 5 minutes if there is no free disk space;
*) ping — fixed ping getting stuck (after several thousands of ping attempts);
*) ppp — added initial support for ZTE K4203-Z and ME3630-E;
*) ppp — added output values for «info» command for finding the GSM base station’s location («LAC» and «IMSI»);
*) ppp — fixed «user-command» output;
*) ppp — fixed non-standart PAP or CHAP packet handling;
*) ppp — improved MLPPP packet forwarding performance;
*) ppp — use interface name instead of IP as default route gateway;
*) proxy — fixed potential crash;
*) proxy — fixed rare program crash after closing client connection;
*) quickset — added «Band» setting to «CPE» and «PTP CPE» modes;
*) quickset — added special firewall exception rules for IPSec;
*) quickset — fixed incorrect VPN address value on arm and tilera;
*) quickset — simplified LTE status monitoring;
*) quickset — use active user name and permissions when applying changes;
*) rb1100ahx4 — fixed startup problems (requires additional reboot after upgrade);
*) rb3011 — fixed packet passthrough on switch2 while booting;
*) rb750gr3 — fixed USB power;
*) routerboard — added «caps-mode» option for «reset-configuration»;
*) routerboard — added «caps-mode-script» for default-configuration print;
*) routing — allow to disable «all» interface entry in BFD;
*) safe-mode — fixed session handling when Safe Mode is used on multiple sessions at the same time;
*) sfp — fixed invalid temperature reporting when ambient temperature is less than 0;
*) sms — decode reports in readable format;
*) sniffer — do not skip L2 packets when «all» interface mode was used;
*) snmp — added «ifindex» on interface traps;
*) snmp — added CAPsMAN interface statistics;
*) snmp — added ability to set «src-address»;
*) snmp — fixed «/system resource cpu print oid» menu;
*) snmp — fixed crash on interface table get;
*) snmp — fixed wireless interface walk table id ordering;
*) socks — fixed crash while processing many simultaneous sessions;
*) ssl — added Wildcard support for «left-most» DNS label (will allow to use signed Wildcard certificate on VPN servers);
*) supout — fixed IPv6 firewall section;
*) switch — fixed «loop-protect» on CRS SFP/SFP+ ports;
*) switch — fixed multicast forwarding on CRS326;
*) tile — fixed copying large amount of text over serial console;
*) tr069-client — fixed lost HTTP header on authorization;
*) trafficgen — added «lost-ratio» to statistics;
*) ups — show correct «line-voltage» value for usbhid UPS devices;
*) userman — added «/tool user-manager user clear-profiles» command;
*) userman — do not send disconnect request for user when «simultaneous session limit reached»;
*) userman — lookup language files also in «/flash» directory;
*) vlan — do not delete existing VLAN interface on «failure: already have such vlan»;
*) webfig — fixed wireless «scan-list» parameter not being saved after applying changes;
*) winbox — added «eap-identity» to CAPsMAN registration table;
*) winbox — added «no-dad» setting to IPv6 addresses;
*) winbox — added «reselect-channel» to CAPsMAN interfaces;
*) winbox — added «session-uptime» to LTE interface;
*) winbox — added TR069 support;
*) winbox — do not autoscale graphs outside known maximums;
*) winbox — fixed wireless interface «amsdu-threshold» max limit;
*) winbox — hide LCD menu on CRS112-8G-4S;
*) winbox — make IPSec policies table an order list;
*) winbox — moved LTE info fields to status tab;
*) winbox — show «/interface wireless cap print» warnings;
*) winbox — show «/system health» only on boards that have health monitoring;
*) winbox — show «D» flag under «/interface mesh port» menu;
*) wireless — NAK any methods except MS-CHAPv2 as inner method in PEAP;
*) wireless — added option to change «nv2-downlink-ratio» for nv2 protocol;
*) wireless — added option to set «fixed-downlink» mode for nv2 protocol;
*) wireless — allow VirutalAP on Level0 (24h demo) license;
*) wireless — always use «multicast-helper» when DHCP is being used;
*) wireless — do not skip >2462 channels if interface is WDS slave;
*) wireless — fixed 802.11u wireless request processing;
*) wireless — fixed EAP PEAP success processing;
*) wireless — fixed compatibility with «AR5212» wireless chips;
*) wireless — fixed rare crash on cap disable;
*) wireless — fixed registration table «signal-strength» reporting for chains when using nv2;

Отправить ответ

Show Buttons
Hide Buttons